Fanuc
0 Masterboards
If you know which 'zero' you have, please click the
appropriate
link. If you're not sure what version of the zero you have, use the
links following to help you identify your control and options precisely.
Fanuc 0A*
Fanuc 0B
Fanuc 0C
Fanuc 0D
*Fanuc 0A with Type B
characteristics, "Special
A" (Has serial # A16B-1010-0210).
In
order to find the control type, check the serial number of your Fanuc
zero:
To
determine the version of the Fanuc 0 series CNC Control, check the
master board number and/or the
software
version. The Master board number is found on the top left side of the
main circuit board, usually
mounted
in the control cabinet that has the daughter card attached.
It
should not be
confused with “A02B-????-????” numbers, which are
Fanuc’s ordering numbers and are usually found on a sticker above
the master board.
When
you have the model number Click Here to Continue
Checking
Software Version:
The
software
version also confirms the model of your control, and memory options.
You can determine the software version by powering-up the control with
E-stop active (button depressed).
The
control should hang on the software version screen (in the lower right
corner of this screen, you will
see
the servo version number as well).
©
Memex, 2007